data sheet no. pd10041-d series pvi5013r photovoltaic isolator solid-state opto-isolated mosfet gate driver dual-channel, 5v, 1.0 a general description the pvi5013r photovoltaic isolator is a dual-channel, opto-isolated driver capable of directly driving gates of power mosfets or igbts. it utilizes a monolithic integrated circuit photovoltaic generator of novel construction as its output. the output is controlled by radiation from a gaalas light emitting diode (led) which is optically isolated from the photovoltaic generator. the pvi5013r is ideally suited for applications requiring high-current and/or high voltage switching with optical isolation between the low-level driving circuitry and high-energy or high- voltage load circuits. it can be used for directly driving gates of power mosfets. the dual- channel configuration allows its outputs to drive independent discrete power mosfets, or be connected in parallel or in series to provide higher-current drive for power mosfets or higher-voltage drive for igbts. pvi5013r employs a fast turn-off circuitry. pvi5013r photovoltaic isolators are packaged in an 8-pin, molded dip package with either thru-hole or surface-mount (gull-wing) terminals. it is available in standard plastic shipping tubes or on tape-and-reel. please refer to part identification information opposite. applications ! telecommunications ! load distribution ! industrial controls ! instrumentation and measurement part identification pvi5013r thru-hole pvi5013rs surface-mount PVI5013RS-T surface-mount, t ape and reel features ! monolithic construction ! 3,750 v rms i/o isolation ! 1,200 v dc output-to-output isolation ! dual-channel application flexibility ! solid-state reliability ! ul recognized and babt certified www.irf.com 1
series pvi5013r 2 www.irf.com electrical specifications (-40c t a +85c unless otherwise specified ) input characteristics limits units minimum input current (see figure 1) 5.0 ma input current range (see figure 1) 3.0 to 25 ma maximum continuous input current @ t a =+25c 40 ma led forward voltage drop @ 5ma, t a =+25c (see figure 3) 1.4 v maximum reverse voltage 7.0 v maximum reverse current @ -7v dc , t a =+25c 10 a output characteristics limits units minimum forward voltage 8.0 v dc maximum reverse current 10 a dc coupled characteristics limits units minimum output voltage @ i led = 5ma, r l = 10m ? 3v @ t a =0c to +70c (see figures 1 and 2) maximum output voltage @ i led = 5ma, r l = 10m ? 8v @ t a =0c to +70c (see figures 1 and 2) maximum voltage differential between outputs 1.0 v @ i led = 5ma, r l = 10m ? typical output short-circuit current 1.0 a @ i led = 5ma, @ t a =+25c (see figures 1 and 2) maximum turn-on time @ i led = 5ma, c load = 200pf (see figure 4) 5ms max. turn-off time @ i led = 5ma, c load = 200pf (see figure 4) 0.25 ms off-state clamping resistance: minimum 100 ? maximum 3300 ? general characteristics limits units minimum dielectric strength, input-output 3750 v rms minimum dielectric strength, output-to-output 1200 v dc minimum insulation resistance, input-to-output @t a =+25c, 50%rh, 100v dc maximum capacitance, input-output 5.0 pf maximum pin soldering temperature (10 seconds maximum) +260 c ambient temperature range: operating -40 to +85 c storage -40 to +125 c connection diagram 10 12 5 (-) 6 (+) 7 (-) 8 (+) 1 2 3 4 ? international rectifier does not recommend the use of this product in a erospace, avionics, military or life support applica tions. users of this international rectifier product in such applications assume all risks of such use and indemnify international rectifier against all damages re- sulting from such use.
series pvi5013r www.irf.com 3 figure 1. typical output characteristics figure 2. typical variation of output figure 3. input characteristics (current controlled) figure 4. typical response time load ca p acitance (p f ) response time (microseconds) 100 200 300 400 500 500 100 50 1000 5000 iled=5ma toff ton 60 -40 0 20 40 80 100 -20 ambient tem p erature ( de g . c ) normalized output 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 iled=5ma short-circuit current output voltage input current (ma) led forward volta g e dro p ( volts dc ) 16 20 12 8 4 0 0.5 1.0 1.5 2.0 0 caution: provide current limiting so that 25 ma maximum steady- state control current rating is not exceeded min. device and +85 deg. c limit typical max. device and -40 deg. c limit output short-circuit current (ua) output voltage (v dc ) 0 1 2 3 4 5 6 7 8 9 10 0 5 10 15 20 25 30 35 40 0 2 4 6 8 10 12 14 16 18 20 open circuit voltage r l =10m ? short circuit current input current (ma)
series pvi5013r 4 www.irf.com case outlines ir world headquarters: 233 kansas st., el segundo, california 90245 tel: (310) 252-7105 data and specifications subject to change without notice. 10/17/2003 01-2030 01 01-2031 01
|
